Rosenberger Headquarters Germany   Rosenberger locations
deutsch
Home Markets & Products Online Catalog Company News & Events Service Job & Career Contact Microsites Webshop
Rosenberger Site Solutions
Rosenberger offers fully developed mobile communication infrastructure coax and fiber optic site solution products for the complete connectivity of radio base stations – from the BBU/PSU to the RRH and antenna.
 
 
NEX10™ - Miniature Low PIM RF Coax Connector System for Small Cells
The new NEX10™ connector system is designed to meet the existing and future demands of small cell and upcoming 5G networks. The new NEX10™ interface offers very low PIM performance in a robust design and compact size. It was designed using the many years of experience gained in the field of Low PIM connector design to develop a robust, low PIM connector.

NEX10™
NEX10™
Features & Benefits
  • Small size, 12.7 mm flange height
  • Robust design for outdoor use
  • Screw and push-pull coupling mechanism
  • −166 dBc PIM, independent of torque
  • Operating till 20 GHz with excellent return loss
  • Optimized for cable sizes of up to ¼” corrugated cables

Applications

The NEX10™ interface is designed to meet the demands of upcoming 5G Networks and is the ideal candidate for applications requiring PIM stability in a compact size such as small cells, distributed antenna systems (DAS), in-building architecture, and MIMO. Rubber Boot and Multi Coax will be standardized in NEX10™ too.

  • Small Cell Applications
  • Low-power base stations
  • In multi-operator/multiband DAS
  • Blind mate for panel as well as test & measurement
4.3-10 - New Connector System for the Mobile Communication Market
4.3-10 Connector System for the Mobile Communication Market
4.3-10 Connector System for the Mobile Communication Market
The new 4.3-10 connector system is designed to meet the rising performance needs of mobile network equipment and has the potential to become the new standard in the mobile communication market. An example of an application is to connect the RRU to the antenna.

Product Features
  • Small size connector system
  • Best electrical performance
  • Lowest Passive Intermodulation (low PIM)
  • Lower coupling torque
  • Easy installation


Coupling Mechanisms

  • Screw coupling
    (screw-on)
  • Quick-Lock mechanisms
    (Push-Pull)
  • Hand-screw, tool less
Jumper Cables
Rosenberger coaxial jumpers are designed using the many years of experience gained by Rosenberger engineers in this field and also utilize Rosenberger’s unique knowledge of designing and manufacturing world-leading rack and desktop PIM testing equipment.

 	 SLink™ Product Range
no-img
no-img

RF Jumper Cables - Superior performance up to 6GHz

Not only do Rosenberger SiteLink jumpers have the industry-best PIM levels -117 dBm / 160 dBc @ 2 x 20 W (typ. -120 dBm / -163 dBc @ 2 x 20 W) but these excellent levels are guaranteed for every assembly that leaves the Rosenberger production facility.

Features

  • Factory made - every assembly is 100 % PIM and RL tested and serialized
  • Best in class PIM and RL-values
  • Superior performance up to 6 GHz
  • Measurement-protocol available for each jumper on webportal: http://jumper.rosenberger.com/
  • High quality – PIM and VSWR 100% tested
  • Different connector types available
  • More throughput
  • Less dropped calls
  • Supporting any technology
  • WiFi-Ready


Power Jumper Cables

The unique coaxial design ensures more efficient cable capacity resulting in increased stabilization of the supply voltage. In addition to the superior electrical performance, the Rosenberger coaxial design offers a smaller diameter over jacket, a tighter bending radius, a more flexible installation as well as higher protection against induced currents and surges.

Features

  • Available in 6 mm² or 10 mm²
  • High cable capacity
    • Stabilization of RRH supply voltage
    • Low inductance
    • Improved transient response
  • Smaller diameter and higher flexibility compared to two-wire design
  • Tight bending radius
  • UV-resistant
  • 360° EMI shielded - higher surge protection
  • Easy installation

 

 

Fiber Optic Jumper Cables

The fiber optic jumper cables build the flexible interconnection between Box and Boxless Solutions and the RRHs. Those outdoor jumper cables are designed for harsh environments and support the various interfaces of mobile solution providers.

Features

  • Single-channel cable for harsh outdoor environment
  • Operating temperature range -40 °C to +85 °C
  • High UV resistance
  • High crush resistance
  • Both sides factory assembled with FO connectors
  • Single data channel in one cable
  • Factory tested Insertion Loss (IL) including test report

 

High Performance Fiber-to-the-Antenna Cabling
no-img
no-img
no-img
Products
  • Hybrid cables (Fiber and Power) 
  • Jumper cables, feeder cables and trunk systems (multi-fiber)
  • Fiber distribution units
  • Indoor equipment jumper cable
  • Outdoor multi channel cables
    (PreCONNECT® Tower Multi-Fiber System - TMFS,
    PreCONNECT® Fiber Feeder Outdoor)
  • Accessories, e.g. cable clamps or rubber sleeves
  • Tools
Features
  • Pre-fabricated with up to 24 coded fibers
  • Tested glass fiber patch cords and trunks
  • Robust distribution units and multi-fiber cable
  • Pair coded cable which assures easy and error-free installation
  • High UV resistance of the cable sheaths
  • Waterproof installation in compliance with
    IP 67
  • Fast and safe installation
Rosenberger Fiber Enclosure (RFE)
The new developed and qualified Rosenberger Fiber Enclosure (RFE) with its snap-on locking mechanism sets a milestone in outdoor FTTA installation. RFE's area waterproof sealing enclosures for fiber optic and data cable assemblies and are available completely pre-assembled in cable assemblies as well as accessories for refitting cable systems already mounted in the field.

no-img
no-img
Product Features
  • For cable diameters from 4.5 mm  up to 9 mm
  • Easy to install, even in the field
  • Pre-assembled as well as accessories for refitting
  • Snap-on locking mechanism
  • Waterproof according to IP 67
  • UV resistant
  • UL 94-VO
Applications
  • For fiber and data cable assemblies
  • Outdoor and harsh environments applications
  • 4-hole, square flange for RRUs and distribution boxes
Accessories
no-img
no-img
Accessories & Tools
  • Optical Distribution Frames
  • Interior Excess Fiber Cable Enclosures
  • Cable Clamps
  • Weatherproofing Kits
  • Grommets
  • Grounding Kits
  • Hoisting Grips
  • Tools


Test & Measurement Equipment

  • Fiber Loop
  • Inspection and Cleaning Kit
  • Test Laser
  • Reel Cleaner
  • Click Cleaner
  • Test Cables
  • T-Adaptor
  • Loads
  • Adaptors